Looks great backlit!
Our marquees come in two different versions:
1) ULTIMATE Marquee is for people who want it all! They are printed on the same type of backlight material that you would find on today’s arcades and then laminated a great finish and durability.
2) ULTIMATE Marquee WITH ADHESIVE on the back, also laminated.
Marquees can be printed at any height up to 12" high. If your marquee is more than 23" wide please use the pull down menu to add the appropriate additional cost for the larger marquee.
Type in the exact size in the box below, for example 8x23" or cm 20x56cm
You can create your own marquee or side art using one of the samples at arcade art library or your own design. Artwork you create must be the correct size and it should be at least 200dpi, but 266-300dpi is preferred. Leave the document in RGB mode which has a broader color range. Do not create a file in a lower dpi and then convert it to 300dpi, this only makes the file bigger and does not enhance the resolution. It will still come out blocky and actually worse then if you left it at a lower dpi. Start creating at 200 or 300 dpi at full size, in other words, if you are creating a 300dpi marquee that will print at 26x8” create it at that size. We will print it the size you send it. Design your artwork with the Marquee retainer in mind and leave a 1/2”-3/4” on the top and bottom empty.The file should be a .psd photoshop or .ai adobe illustrator file, or a .tif if using another program such as paintshop pro or Coreldraw.
If you need to upload your files for an order, please do so using this form: